The ORIANA designer solar light is a solar-powered LED lighting solution that can be used at any location where there is no mains power supply. Thanks to its timeless ¼ prizewinning design, the ORIANA is excellent for lighting modern urban space as well as protected monumental structures. The ingenious operating system guarantees flawless function for several nights even during the worst weather. According to EN13201 the ORIANA is superlative for the illumination classes S5 and S6; that is to say, for side streets with minimal traffic, squares, parking places etc.
Lower Operation Cost : It is less expensive to
operate a solar powered street light than a
traditional street light.
Compact Design : Our design and technology
implementation have been driven by our desire
to eliminate the need for bulky external battery
boxes and external solar panels and achieve All
in One Solar Powered Street Light.
Reduced Damage/Theft : By locating directly on
the light fixture and placing the battery within, the
risk of damage, theft or tampering is greatly
reduced. There are no wires in the street pole,
which means that the wire itself (which exists in
regular street lights) can't be stolen and sold for
Ruggedized Technology : Require less
maintenance and reduced parts replacement
due to initially incorporating higher quality
Insect Swarms : The solar powered street light
uses LED lighting which does not produce
Infrared light, and therefore will not attract
Improved Safety : The solar powered street light
does not require connection to an electrical grid.
It is safer and easier to install. In the event of a
power outage, the light remains on. This reduces
the chance of accidents and the constant light
Anywhere/anytime : The
solar powered street light can be used in any
location. Since no electrical grid is required, it
can be installed on buildings, in parking lots, in
remote locations simply by hanging it on a pole.
Faster Installation : Since you don't need to
trench power lines to the pole, run wires up the
pole, connect wires to an electrical grid, or hard
wire the street light, the installation is
significantly faster. In fact, it is so easy, it can be
installed on the pole before it's erected, and
thereby reducing a step completely from the
Make the solar panel face south while installing, Meanwhile, you can adjust the angle between lamp head and level (as follow), you'd better reconcile the lamp head with local latltude Can adjust the angle (0°-50°) Installation Notes Install fuse if present before use. Tool supplied to tighten security bolts provided. Face solar panel
an much towards the north as possible to maximize sun exposure.
To place the light pole into the best spot with good day lighting. The light pole should be the length 4.6m, the thickness 2.0mm with material iron or steel, the diameter 50-90mm. Unfold the knob of fuse and take out the insulating film if the fuse sockets, to check up if the fuse working right or not, and then tighten. Place the lamp on the pole by its sleeve, special screw should be used and steady installation should be ensured.
-20°C to 60°C
|LED Light with
Lightning Viewing Angle
3600 - 3900lm